Retrieving A Stored Destination - Sharp DX-C310 Operation Manual

RETRIEVING A STORED DESTINATION

A destination fax number is retrieved by simply selecting the one-touch key of that destination.
Keys in the display can be selected with the arrow keys and the [OK] key.
(1)
1
(2)
(1)
AAA AAA BBB BBB
CCC CCC DDD DDD
EEE EEE FFF FFF
GGG GGG HHH HHH
III III
JJJ JJJ
2
• Frequently used destinations can be displayed in the [Freq.] index. Specify that a destination be displayed in the
[Freq.] index when you store the destination.
• To continue specifying other destinations...
Select the [Next Address] key and press the [OK] key, and then repeat (1) and (2) of this step.
• System Settings (Administrator): Must Input Next Address Key at Broadcast Setting
This setting determines whether or not the [Next Address] key can be omitted before specifying the next destination.
Factory default setting: The [Next Address] key can be omitted.
• System Settings (Administrator): Disable Switching of Display Order
This is used to disable switching of the order of display of the one-touch keys in the address book screen. The currently
selected display order will be the order that is used after this setting is enabled.
Display the address book screen.
(1) Select the [Address] key.
BACK OK
(2) Select the [Address Book] key.
BACK OK
Select the destination.
(2)
(1) Select the index tab where the destination is
BACK OK
(2) Select the one-touch key of the desired
4-21
stored.
☞
Index display (page 4-12)
destination.
If you select an incorrect destination, press the [OK] key
again to cancel the selection.
FACSIMILE
Contents