Sharp DX-C310 Operation Manual page 415

• Completed job
Message
"Send OK" Transmission completed.
"In Memory" Reception completed but the fax
has not been printed.
"Received" A received fax has been printed or
deleted in the check image screen.
"Forward OK" The received fax has been
forwarded.
"Stopped" The job was stopped.
"Number of Completion of a broadcast
successful transmission, serial polling or
transmission inbound routing operation.
destinations / If transmission to 3 destinations
Total was successful out of a total of 5,
destinations "003/005" will appear.
OK"
"No An error occurred because there
response" was no response from the
destination.
"Busy" An error occurred because the
other party was busy.
"Reject A fax was sent from a party that
Reception" has been blocked by the anti junk
fax function.
"NGxxxxxx" Transmission/reception was not
successful because a
communication error occurred (a
6-digit error code appears in
xxxxxx.)
"Error" An error occurred while the job was
being executed.
Status
4-122
FACSIMILE
Contents