Sharp DX-C310 Operation Manual page 331

3
Press the [BLACK & WHITE START] key.
Transmission begins.
4
To cancel transmission...
While "Dialing. Press [
• The following functions cannot be used with direct transmission:
Program, Timer Transmission, Card Shot, Job Build, Polling Memory, Memory Box, 2-Sided Original Scanning, Global
Address Search
• Resending will not take place when a direct transmission is not successful due to a communication error or other reason.
• If a fax transmission is already in progress when the direct transmission operation is performed, the direct transmission will
wait until the previous transmission is finished. When the previous transmission is completed, the direct transmission will
begin. While the direct transmission is waiting, the [JOB STATUS] key can be pressed to display the job status screen. No
other operations are possible.
☞
CHECKING THE STATUS OF FAX JOBS
BACK OK
] to cancel." appears in the display, press the [STOP] key (
(page 4-119)
4-38
Select the [Direct TX] key.
FACSIMILE
).
Contents