Sharp DX-C310 Operation Manual page 129

Specifying a non-standard original size
Keys in the display can be selected with the arrow keys and the [OK] key.
1
(3)
2
When a number from 11-3/4" to 14" (298 mm to 356 mm) to the X (horizontal) dimension and a number from 1" to
3-7/8" (25 mm to 99 mm) to the Y (vertical) dimension are entered at the same time, an original cannot be scanned.
To cancel the size input...
To cancel the size input, select the [Cancel] key.
Select the [Size Input] key.
BACK OK
Enter the original size.
(1) (2)
(1) Enter the X (horizontal) dimension of the
BACK OK
(2) Enter the Y (vertical) dimension of the
(3) Select the [Basic Menu] key.
2-29
original.
Select either of the keys with the
press the [OK] key repeatedly to change the number.
• When the document glass is used, enter a number from
1" to 11-5/8" (25 mm to 297 mm).
• When the automatic document feeder is used, enter a
number from 3-1/2" to 14" (89 mm to 356 mm).
• When a number which is from 5-3/8" (139 mm) and less
is entered in 2-Sided copy mode, an original cannot be
scanned.
• If the horizontal dimension of the original is less than
3-1/2" (89 mm), use the document glass.
original.
Select either of the keys with the
press the [OK] key repeatedly to change the number.
• When the document glass is used, enter a number from
1" to 8-1/2" (25 mm to 216 mm).
• When the automatic document feeder is used, enter a
number from 4" to 8-1/2" (100 mm to 216 mm).
• If the vertical dimension of the original is less than 4"
(100 mm), use the document glass.
You will return to the base screen.
Make sure that the entered dimensions appear in the
[Original] key.
COPIER
keys and
keys and
Contents