Sharp DX-C310 Operation Manual page 485

Specifying the original scan size (by numerical values)
When scanning a non-standard size original such as a card, follow these steps to specify the original size.
Keys in the display can be selected with the arrow keys and the [OK] key.
Change the mode and display the scan size setting screen.
(1) Select the [Mode Switch] key.
(2) Select the mode that you wish to use.
1
(3) Select the [Scan Size] key.
The original size set in the system settings appears in the [Scan Size] key.
☞
IMAGE SETTINGS
2
3
(page 5-58)
BACK OK
BACK OK
5-63
SCANNER/INTERNET FAX
Select the [Scan Size] key.
Select the [Size Input] key.
Contents