Color Mode - Sharp DX-C310 Operation Manual

4
For some original size settings, the same size of paper as the original may not be automatically selected. In this case,
manually change the paper size.
5
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Even if a color mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key is
6
pressed.
To cancel scanning of the original and copying...
Press the [STOP] key (
Check the paper to be used and the
BACK OK

color mode.

Make sure that the desired paper (tray) and color mode are
selected.
Set the number of copies (number of
7
sets) with the numeric keys.
) and then enter the correct number.
).
2-11
• To change the paper (tray), select the [Paper Select] key and
press the [OK] key.
☞
PAPER TRAYS (page 2-9)
• To change the color mode, select the [Color Mode] key and
press the [OK] key.
☞
COLOR COPY MODES
COPIER
(page 2-21)
Contents