Sharp DX-C310 Operation Manual page 116

4
(1)
5
(2)
To make 2-sided copies of a 1-sided portrait original placed horizontally, or to invert the reverse side with respect to
the front side when copying a 2-sided original, set the [Binding Change] checkbox to
☞
Using the [Binding Change] checkbox
6
For some original size settings, the same size of paper as the original may not be automatically selected. In this case,
manually change the paper size.
Select the [2-Sided Copy] key.
BACK OK
Select the 2-sided copy mode.
(1) Select the key of the desired mode.
BACK OK
(2) Select the [Basic Menu] key.
(page 2-17)
Check the paper to be used and the
BACK OK
color mode.
Make sure that the desired paper (tray) and color mode are
selected.
• To change the paper (tray), select the [Paper Select] key and
press the [OK] key.
☞
PAPER TRAYS
• To change the color mode, select the [Color Mode] key and
press the [OK] key.
☞
COLOR COPY MODES
2-16
:Automatic 2-sided copying of 1-sided originals
:Automatic 2-sided copying of 2-sided originals
:1-sided copying of 2-sided originals
.
(page 2-9)
(page 2-21)
Contents
COPIER