Base Screen - Sharp DX-C310 Operation Manual

BASE SCREEN

Scan mode, Internet fax mode, USB memory mode, and PC scan mode are operated by selecting settings and
commands in the base screens of these modes. To display the base screen of a mode, press the [IMAGE SEND] key
and select the desired mode in [Mode Switch].
When sending an image, you can use a transmission destination stored in the Address Book. The Address Book screen
is shared by scan mode, Internet fax mode, fax mode and data entry mode.
To switch to the Address Book screen from the base screen, select the [Address] key and then the [Address Book] key
and press the [OK] key. To switch to the base screen from the Address Book screen, select the [Basic Menu] key and
press the [OK] key.
Base screen of scan mode
Address Book screen
• This manual uses the base screen of scan mode as an example when operations common to all modes are explained.
• The procedures in this manual assume that the base screen of scan mode appears when the [IMAGE SEND] key is pressed.
System Settings (Administrator): Default Display Setting
One of the following screens can be selected for the initial screen that appears when the [IMAGE SEND] key is pressed.
• Base screen of each mode (scan mode, Internet fax mode, fax mode and data entry mode)
• Address book screen
READY
BACK OK PRINT
DATA
LINE
IMAGE SEND
DATA
COPY
SYSTEM
JOB STATUS SETTINGS
Modes that cannot be used because the
required options are not installed are grayed
out to prevent selection.
AAA AAA
BBB BBB
CCC CCC
DDD DDD
EEE EEE
FFF FFF
GGG GGG
HHH HHH
III III JJJ JJJ
5-12
SCANNER/INTERNET FAX
LOGOUT
Contents