Auto Paper Selection Setting - Sharp DX-C310 Operation Manual

Auto Paper Selection Setting

The paper types* that the Auto Paper Selection function will
select can be specified. Select one of the following settings:
• Plain Paper
• Plain and Recycle Paper
• Recycle Paper
The Auto Paper Selection function will not select any
paper types other than the paper types specified with
this setting.
* The paper type set for each paper tray using
Tray Settings" (page 6-13) in the system settings
(general).
Detect Standard in Auto Color
Mode
When the color mode is set to auto in copy mode, the
discrimination point for detecting whether originals are
color or black and white can be set to one of 5 levels. To
make it easier to detect a black and white original, adjust
the setting toward [Black & White]. To make it easier to
detect a color original, adjust the setting toward [Color].
Fusing Control Settings
These are used to control the toner fusing temperature
according to the weight of the paper.
These settings apply to plain paper, recycled paper,
punched paper, pre-printed paper, letterhead paper,
colored paper, and user type paper.
You can select "16 to 23 lbs." or "23+ to 28 lbs."
2 2
("60g/m to 89g/m " or "90g/m
• Be sure to use only paper that is in the same weight
range as the weight range set here. Do not mix
plain or other paper that is outside the range with
the paper in the tray.
• When settings are changed, the changes will take
effect after the machine is restarted. To restart the
machine see "TURNING THE POWER ON AND
OFF" (page 1-14) in "1. BEFORE USING THE
MACHINE ".
"Paper
2 2
to 105g/m ").
Interval of Image Quality
Adjustment
The machine automatically performs Image Quality
Adjustment at regular intervals in order to prevent
changes of color after repeated color printing.
This setting is used to select the interval of Image
Quality Adjustment.
The interval becomes shorter and Image Quality
Adjustment is performed more frequently in the following
order:
Setting 1 (Long), Setting 2, Setting 3, Setting 4, Setting 5
(Short)
Guidelines for selection
If you print mostly business documents in black and
white, Setting 2 (factory default setting) or Setting 1
(Long) is recommended.
If you often print photos, Setting 3 or higher is
recommended.
• When Setting 3 or higher is selected, more toner is
consumed than usual, and when a job is being
printed, printing may take place more slowly.
• Image Quality Adjustment can also be performed
whenever you notice that the color has changed.
See "Image Quality
6-73
SYSTEM SETTINGS
WEB PAGE (ADMINISTRATOR)
Adjustment" (page 6-10).
Contents