Initiating Polling Reception Manually - Sharp DX-C310 Operation Manual

INITIATING POLLING RECEPTION MANUALLY

Use this procedure when you must start polling after listening to a recorded greeting, such as when using a fax
information service.
• Make sure that an original is not placed in the machine when using the polling reception function.
• This function cannot be used to poll multiple machines (serial polling).
Keys in the display can be selected with the arrow keys and the [OK] key.
(2)
(3)
1
AAA AAA BBB BBB
CCC CCC DDD DDD
EEE EEE FFF FFF
GGG GGG HHH HHH
III III JJJ JJJ
• In addition to specification by one-touch key, a destination can also be specified using a search number. You can
also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see
• After selecting the [Speaker] key, you can select the [Speaker Volume] key to adjust the volume of the speaker. The
speaker volume changes each time the [Speaker Volume] key is selected. Adjust the volume to the desired level.
(2)
2
• This function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.
• The receiving machine bears the expense (phone charges) of the polling reception.
(1)
BACK OK
BACK OK
"ENTERING DESTINATIONS" (page 4-19).
BACK OK
Enter the destination fax number.
(1) Select the [Speaker] key.
You will hear the dial tone through the machine's speaker.
(2) Select the [Address] key in the base screen.
(3) Select the one-touch key of the desired
destination.
A group key cannot be used.
Receive the fax.
(1) Select the [Special Modes] key.
☞
SPECIAL MODES
(2) When you hear the fax tone, select the
[Polling] key.
The fax is received.
4-93
FACSIMILE
(page 4-69)
Contents