Sharp DX-C310 Operation Manual page 597

Settings of each tray
The following settings can be configured.
Item
Type
Size
Feeding Approved Job
• If the paper size specified here is different from the size of paper that is loaded in a tray, a problem or misfeed may result
when printing.
To change the paper size in a tray, see "1. BEFORE USING THE MACHINE".
• Paper properties such as "Fixed Paper Side" are automatically set when the paper type is selected. The paper tray
properties cannot be changed in this screen.
• If "Disabling of Tray
(except for the bypass tray) cannot be configured.
Select the type of paper that is loaded in the tray.
The paper types that can be selected vary by paper tray. For more information, see
"Tray Settings" (page 6-50).
To store a new paper type, see
Select the paper size from the list. The paper sizes that can be selected vary by tray.
The sizes that can be selected may also be restricted by the paper type selected
above. For more information, see
If the desired size does not appear in the list, select [Custom Size] and directly enter
the size (only for the bypass tray). For more information, see
6-50).
Select the modes that can be used. If there is a function that you do not wish to be
used with the selected tray, disable the function.
When the "Type" is other than plain paper, recycled paper, colored paper, or a user
type, [Fax] and [Internet Fax] cannot be selected.
Settings" (page 6-72) has been enabled in the system settings (administrator), the tray settings
Description
"Paper Type
"Tray Settings" (page 6-50).
6-49
SYSTEM SETTINGS
WEB PAGE (GENERAL)
Registration" (page 6-51).
"Tray Settings" (page
Contents