Checking Completed Jobs - Sharp DX-C310 Operation Manual

CHECKING COMPLETED JOBS

You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on
completed broadcast transmission jobs, received fax forwarding jobs and serial polling jobs. Select the key of the
desired job in the completed jobs screen and select the [Detail] key. The job detail screen (see below) will appear.
The job name appears at the top of the job detail screen.
To view details on the job, select either of the
information appears on each screen.
Tab name
Failed
All Destinations
* Recalling is not possible for a broadcast transmission that includes a Scan to FTP address, Scan to Network Folder
address, or Scan to Desktop address.
keys with the
This shows information on destinations for which communication failed. A broadcast
control number (3-digits) appears in front of each destination.
Address: The name or fax number of each destination.
Start time: Time at which communication began.
Status: Description of failure (error)
The [Retry] key can be selected to re-attempt transmission to that destination.*
Shows all addresses specified in the job. A broadcast control number (3-digits)
appears in front of each destination.
Address: The name or fax number of each destination.
Start time: Time at which communication began.
Status: Communication result
The [Retry] key can be selected to transmit to all destinations again.*
4-125
keys and press the [OK] key. The following
Information displayed
FACSIMILE
Contents