Sharp DX-C310 Operation Manual page 120

7
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [COLOR START] key or the [BLACK & WHITE START] key.
8
Scanning begins.
Remove the original and place the next original, and then press the [COLOR
START] key or the [BLACK & WHITE START] key.
9
Repeat this step until all originals have been scanned.
For the second original and following originals, use the same [START] key as you did for the first original.
10
To cancel scanning of the original and copying...
Press the [STOP] key (
System Settings (Administrator): Initial Status Settings (2-Sided Copy)
The default 2-sided copy mode can be changed.
Set the number of copies (number of
7
sets) with the numeric keys.
) and then enter the correct number.
Select the [Read-End] key.
BACK OK
).
2-20
COPIER
Contents