Sharp DX-C310 Operation Manual page 446

Scan mode
3
• If you wish the recipient to be a Cc recipient, select the [Cc] key and press the [OK] key.
• The [Bcc] key only appears when Bcc has been enabled using "Bcc Setting" (Web page only) in the system settings
(administrator). If you wish the recipient to be a Bcc recipient, select the [Bcc] key and press the [OK] key.
• To continue specifying other destinations...
It is possible to specify multiple scan mode (Scan to E-mail, Scan to FTP, Scan to Desktop, Scan to Network
Folder), Internet fax, and fax mode destinations when performing a broadcast transmission (maximum of 500
destinations). To specify multiple destinations, repeat steps 2 through 3.
When performing Scan to E-mail, you can select a one-touch key and then select the [Cc] key or the [Bcc] key to
send Cc or Bcc copies of the e-mail.
• System Settings (Administrator): Bcc Setting (Web page only)
This setting enables or disables Bcc delivery. When this setting is enabled, the [Bcc] key is displayed in the address review
screen.
• System Settings (Administrator): Must Input Next Address Key at Broadcast Setting
This setting determines whether or not the [Next Address] key can be omitted before specifying the next destination.
Factory default setting: the [Next Address] key can be omitted.
• System Settings (Administrator): Disable Switching of Display Order
This is used to disable switching of the order of display of the one-touch keys in the address book screen. The currently
selected display order will be the order that is used after this setting is enabled.
Select the recipient.
(1) If you are in scan mode, select the key of
BACK OK
the desired delivery method.
Normally the [To] key is selected. This specifies that the
entered e-mail address will be a recipient.
(2) Press the [OK] key.
5-24
SCANNER/INTERNET FAX
Contents