Settings Required In The Web Pages; Storing Destination Addresses For Each Scan Mode In The Address Book - Sharp DX-C310 Operation Manual

SETTINGS REQUIRED IN THE WEB PAGES

To use scan mode and Internet fax mode, the basic network scanner settings, server settings such as SMTP and DNS
server settings, and sender addresses must be configured in the Web pages.
• Server settings
To configure server settings, click [Network Settings] and then [Services Settings] in the Web page menu.
(Administrator rights are required.)
• Basic network scanner settings
To configure network scanner settings, click [Application Settings] and then [Network Scanner Settings] in the Web
page menu. (Administrator rights are required.)
• Internet fax settings
To configure the network scanner settings, click [Application Settings] and then [Internet Fax Settings] in the Web
page menu. (Administrator rights are required.)
STORING DESTINATION ADDRESSES FOR EACH
SCAN MODE IN THE ADDRESS BOOK
To use Scan to FTP, Scan to Desktop, and Scan to Network Folder, destinations must be stored in the address book.
Although destinations for Scan to E-mail and Internet fax do not need to be stored in the address book (they can be
entered directly or looked up in a global address book at the time of transmission), storing these types of destinations in
the address book makes it easy to select them.
The settings that can be selected vary depending on the peripheral devices installed.
When the [Address Book] is selected, the following screen appears.
(1)
(1) [Add] key
Use this key to add a new address.
(2)
(2) List display
This displays a list of the currently stored addresses. An
address can be selected to open an edit/delete screen for
the address.
5-6
SCANNER/INTERNET FAX
Contents