Sharp DX-C310 Operation Manual page 400

(2)
AAA AAA BBB BBB
CCC CCC DDD DDD
EEE EEE FFF FFF
GGG GGG
HHH HHH
III III
JJJ JJJ
2
If a passcode has been omitted in the memory box of the other machine, (5) and (6) are not necessary.
Press the [BLACK & WHITE START] key.
3
Your machine will call the other machine and initiate reception of the fax.
• Polling multiple machines (serial polling) is not possible.
• F-code polling reception can be used in combination with a timer setting. Only one polling reception operation with a timer
setting can be stored at a time.
☞
SENDING A FAX AT A SPECIFIED TIME (Timer)
To cancel polling...
Set the [Polling] checkbox to
(3),(5)
BACK OK
(page 4-74)
in the screen of step 1.
4-107
Enter the destination fax number.
(1) Select the [Address] key in the base screen.
For the [Address] key, see
MODE" (page 4-8).
(2) Select the one-touch key of the desired
destination.
If the destination is not stored in the address book, enter
the fax number with the numeric keys.
If the sub-address and passcode are stored in the one-touch
key, the following sub-steps are not necessary. Go to step 3.
(3) Select the [Sub Address] key.
"/" appears.
(4) Enter the sub-address with the numeric
keys.
(5) Select the [Sub Address] key.
"/" appears.
(6) Enter the passcode with the numeric keys.
FACSIMILE
"BASE SCREEN OF FAX
Contents