Sharp DX-C310 Operation Manual page 517

(1)
4
(2)
Press the [COLOR START] key or the [BLACK & WHITE START] key to scan the
first set of originals.
5
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key (
Insert the next set of originals and press the [COLOR START] key or the [BLACK
& WHITE START] key.
Press the [START] key pressed in step 5.
6
Repeat until all originals have been scanned.
To cancel scanning...
Press the [STOP] key (
7
• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
• The [Configure] key can be selected to change the exposure, resolution, scan size, and send size for each original
page scanned.
If the memory becomes full during scanning, a message will appear and the transmission will be canceled.
To cancel the job build function....
Set the [Job Build] checkbox to
Select job build mode.
(1) Set the [Job Build] checkbox to
BACK OK
(2) Select the [Basic Menu] key.
) to cancel the operation.
) to cancel the operation. All scanned data will be cleared.
Select the [Read-End] key.
BACK OK
in the screen of step 4.
5-95
SCANNER/INTERNET FAX
.
Contents