Scanning Both Sides Of A Card Ontoa Single Page (Card Shot) - Sharp DX-C310 Operation Manual

SCANNING BOTH SIDES OF A CARD ONTO
A SINGLE PAGE (Card Shot)
This function lets you send the front and reverse sides of a card as a single page, without the need to send each side
separately.
Originals
Front
Back
• When using card shot, the original must be placed on the document glass.
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
Specify the destination.
☞
ENTERING DESTINATIONS
2
When scanning to USB memory, there is no need to specify the destination. Go to step 3.
Select the special modes.
(1) Select the [Mode Switch] key.
(2) Select the mode that you wish to use.
3
(3) Select the [Special Modes] key.
(4) Select the [Card Shot] key.
☞
SPECIAL MODES
Transmission
(page 5-22)
(page 5-77)
Scanned image
Place the original face down on the
document glass.
5-85
SCANNER/INTERNET FAX
Contents