Using The Resend Function - Sharp DX-C310 Operation Manual

USING THE RESEND FUNCTION

The destinations of the most recent 8 transmissions by Scan to E-mail, Internet fax (including Direct SMTP addresses)
and/or fax are stored. One of these can be selected to resend to that destination.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
AAA AAA
BBB BBB
CCC CCC
DDD DDD
2
EEE EEE
FFF FFF
GGG GGG
HHH HHH
• When the [Resend] key is selected and a destination selected, the mode of the selected destination is automatically
selected.
• The following types of addresses are not stored for resending.
- A one-touch key in which multiple destinations are stored (group key).
- Scan to FTP, Scan to Desktop, and Scan to Network Folder addresses.
- Broadcasting destinations
- Addresses used only for BCC delivery
- Destinations transmitted to using a program
System Settings (Administrator): Disable [Resend] on Fax/Image Send Mode (Web page only)
This prohibits use of the resend function. When this setting is enabled, the [Resend] key cannot be used in the base screen
of image send mode.
Select the [Resend] key.
BACK OK
Select the key of the desired address.
BACK OK
The last 8 addresses used for transmission are displayed.
5-31
SCANNER/INTERNET FAX
Contents