Storing (Editing/Deleting) A Job Program - Sharp DX-C310 Operation Manual

STORING (EDITING/DELETING) A JOB PROGRAM

The procedures for storing copy settings in a job program and deleting a job program are explained below.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
2
Editing or deleting a job program...
When a highlighted numeric key is selected, the following screen appears.
3
The [Store] key can be selected to delete the stored settings and store new settings. Go to the next step.
When the [Delete] key is selected, the stored settings are deleted. After the deletion is finished, select the [Exit] key to
return to the base screen.
When "Disabling Deletion of Job Programs" is enabled in the system settings, a stored job program cannot be edited
or deleted.
LOGOUT
BACK OK
BACK OK
Press the [#/P] key (
Select the [Store/Delete] key.
Select a numeric key.
Numeric keys in which job programs are already stored are
highlighted.
• To store a job program, select a numeric key that is not
highlighted.
• To edit or delete a job program, select the key in which the
job program is stored (highlighted key).
2-107
COPIER
).
Contents