Reversing The Image (Mirror Image) - Sharp DX-C310 Operation Manual

REVERSING THE IMAGE (Mirror Image)

This feature is used to make a copy that is a mirror image of the original.
Keys in the display can be selected with the arrow keys and the [OK] key.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1
After placing the original, specify the original size.
☞
ORIGINAL SIZES
Select the special modes.
(1) Select the [Special Modes] key.
2
(2) Select the [Image Edit] key.
☞
[Image Edit] KEY
(1)
3
(2)
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
4
select the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for
the first original.)
To cancel scanning and copying...
Press the [STOP] key (
To cancel a mirror image setting...
Set the [Mirror Image] checkbox to
Original
(page 2-28)
(page 2-80)
BACK OK
).
in the screen of step 3.
Mirror image copy
Select Mirror Image.
(1) Set the [Mirror Image] checkbox to
(2) Select the [Special Modes] key.
You will return to the special modes screen. Press the
[BACK] key to return to the base screen of copy mode.
2-83
COPIER
.
Contents