Printing On Envelopes - Sharp DX-C310 Operation Manual

PRINTING ON ENVELOPES

The bypass tray can be used to print on special media such as envelopes. The procedure for printing on an envelope
from the printer driver properties screen is described below.
For the types of paper that can be used in the bypass tray, see
"BEFORE USING THE MACHINE". For the procedure for loading paper in the bypass tray, see
THE BYPASS TRAY" (page 1-47) in "1. BEFORE USING THE MACHINE".
Select the envelope size in the appropriate settings of the application ("Page Settings" in many applications) and then
perform the following steps.
1
In the case of media that can only be loaded in a certain orientation such as an envelope, you can rotate the image
180 degrees if needed. For more information, see
degrees)" (page 3-37).
2
For more information on "Paper Feed", see
It is recommended that you do a test print to check the print result before using an envelope.
"IMPORTANT POINTS ABOUT
Select the paper size.
(1)
(1) Select the envelope size from the "Paper
(2) Click the [OK] button.
(2)
"ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180
Select the bypass tray.
(1)
(1) Select [Paper Feed] on the print screen.
(2) Select [Bypass Tray(Envelope)] from the
(2)
"SELECTING THE
3-20
Size" menu on the page setup screen.
In Mac OS 9, select the envelope size from the
"Paper" menu on the page setup screen.
In Mac OS 9, select [General].
"All pages from" menu.
• In Mac OS 9, select [Bypass Tray(Envelope)] from
the "All pages from" menu of "Paper Source".
• Set the paper type of the bypass tray to [Envelope]
and make sure the envelope is loaded in the bypass
tray.
PAPER" (page 3-19).
PRINTER
PAPER" (page 1-42) in
"LOADING PAPER IN
Contents