Table of Contents
Advertisement
3
Installation and Configuration
3.1 Using 10GBASE-T
10GBASE-T was established as per the IEEE 802.3an-2006 standard, and depending
upon the twisted pair cables, it is an Ethernet standard whereas communication are
transmissible at 10 Gbps, up to maximum of a 100 m.
(1) Supported cable types
Cable type
Cat. 5e or below
Cat. 6
Cat. 6A
In order to attenuate the noise effects in regard to alien crosstalk noise, and
exogenous noise, it is recommended that STP cables be used.
(2) Cable laying environment
Communication might be affected due to exogenous noise to the cables.
The person responsible for laying the cables might request to select appropriate
cables, and to make improvements regarding environmental noise.
18
Transmission distance
Cannot be used
Maximum 37 m (* From 37 m to 55 m there is alien crosstalk)
Maximum 100 m
Advertisement
Table of Contents
