Summary Of Controls And Functions - Abbott FreeGo Training Manual

SUMMARY OF CONTROLS
AND FUNCTIONS
OFF/CHRG
Turns pump off
(and will charge the
battery if plugged in)
ARROW KEYS
Used to increase
or decrease dosage and
rate of feed
They are also used
to switch between settings
on the LCD display and
adjust the hold time
between 1 and 90 min
SET RATE
Sets the amount
of feed needed
per hour
PRIME BUTTON
Used to
auto prime
the system
10
SET DOSE
Amount to be fed. Set to INF
DOSE if a specific dose is not
required
RUN
Operates pump and
delivers feed
HOLD
Pauses pump to a default time
of 5 minutes (the hold time can
be adjusted between 1 and 90
minutes). Use HOLD if you
want to cancel an alarm or
pause feeding
VOL FED
Shows the amount of feed
administered
CLEAR VOL
Clears the accumulated volume that has
been delivered and been stored in pump's
memory
OPTIONS BUTTON
Used to adjust alarm
volume and back light
intensity