frequency.
Audio Preferences (page 2)
Printer Preferences. (inactive during the PSA session)
Accessed From: Tools menu > Preferences button
NOTE: It is important to set an accurate date and time because the device's functions use
the date and time from the programmer. You must exit the PSA session to set the date and
time from the Tools menu.
Audio Preferences
The Audio Preferences window contains two panels:
General Audio. Select the On button to allow audio cues for programmer activity. You can
also select a volume level. The Off button turns all sounds off (except Charging Audio).
Charging Audio. Select the On button for an audio cue when the capacitors charge during a
programming session. An audio cue is always emitted during charging for an Emergency
Shock, regardless of the Charging Audio setting.
Accessed From: Tools menu > Preferences button > Audio tab
Print Screen
The Print Screen button prints an image of the current screen to a PDF.
For more information on printing, see Print Menu (page 32).
Accessed From: Tools menu > Print Screen button
Export Screen
The Export Screen button opens a window which allows you to save the current screen as an
electronic (.png) file and send the file to any storage device (flash drive) connected to one of the
programmer's USB ports. The Merlin™ PCS and Merlin™ 2 PCS detect all connected devices
and asks you to select the device to receive the data.
Accessed From: Tools menu > Export Screen button
Rhythm Display
Contents:
Rhythm Display (page 3)
ECG (page 3)
Markers (page 4)
EGM (page 6)
Waveform Control (page 7)
Rhythm Display Setup Instructions (page 7)
Adjust Display (page 8)
ECG Configuration (page 8)
The reports printed during a PSA session are always saved as a PDF file and may be printed to an external printer.
2
2
2