Download Print this page

Hyundai 10BOP-7 Operation Manual page 94

Advertisement

(2)
Mounting of sealing cap
For sealing of the bore in the drive pinion a
sealing cap (item 5) must be mounted.
This requires the following sealing
application:
LOCTITE 5910 : Product application as
adhesive application onto the supporting
face and around the bore in the drive
pinion as sealing function by excessive
product.
Insert the sealing cap.
Press in the sealing cap with a press until
contact is obtained.
(3)
I
I
nstallation of drive pinion
Pay attention when inserting the drive pinion not to damage the gearing of drive pinion and
helical gear. Damages might cause louder running noises and consequential damages!
Install the preassembled drive pinion
(item 1) into the housing bearing bore
cautiously. For joining turn the wheel
shaft of the transmission cautiously until
the drive pinion engages into the gearing
of the helical gear.
By means of the striking mandrel "S"
install the drive pinion into the bearing
seat until contact is obtained.
(S) Striking mandrel 62478
3-48
BRJ7DU158
BRJ7DU159
BRJ7DU160
BRJ7DU161

Advertisement

loading

This manual is also suitable for:

13bop-7