Advertisement
Pull out, remove and keep the helical
gear (item 3) from the cover opening of
the housing.
Take out and remove the taper roller
bearing inner ring (item 4) upwards from
the bearing bore:
Take off and remove the spacer bush
(item 5) from the bevel pinion shaft.
If disassembly of the bearing inner ring
is not possible with a special tool or
puller, the bearing cage must be
destroyed and the inner ring must be
removed by heating.
When the gearing of the bevel pinion
shaft is damaged, running noises and
consequential damages might occur,
so that the bevel gear set has to be
replaced.
3-19
BRJ7DU081
BRJ7DU082
BRJ7DU084
Advertisement
