Advertisement
D
D
isassembly bearings bevel pinion shaft
Expel the outer rings of the taper roller
bearings (item 2) on both sides from the
housing seat cautiously.
Shims which were damaged have to be
replaced by new shims of the same size.
Disassembly bearings wheel shaft
Expel the outer ring of the taper roller
bearing (item 3) by means of a copper
mandrel and a hammer from the housing
cautiously.
Pull out and remove the outer ring of the
2nd taper bevel bearing (item 4) with the
bearing extracting fixture "S" from the
bore of the housing cover.
The service of the extracting fixture (S) is
analogous like in the figures 49 to 50
shown.
Shims which were damaged have to be
replaced by new shims of the same size.
(S) Extracting fixture 222863.2
Thus the disassembly is ended.
3-21
BRJ7DU088
BRJ7DU089
BRJ7DU090
Advertisement
