Advertisement
3.
SAFETY INSTRUCTIONS
1)
The use as directed requires the strict observance with the specification for installation, dis-and
reassembly, initial operation and maintenance.
2)
Every person concerned with installation, disassembly and reassembly, initial operation and
maintenance of the transmission in the user plant must have read and understood the whole
instruction and in particular the safety instructions.
3)
Any working method which endangers the safety of the transmission is prohibited.
4)
Modifications and changes without the proper permission are affecting the safety of the
transmission and are not allowed.
5)
Only original spare parts from Hyundai are allowed to be used. It is explicitly pointed out to the fact
that spare parts and accessories, which were not supplied by Hyundai are not checked and
approved by us either. We do not accept any liability or admit any original parts from Hyundai.
6)
The described work is only allowed to be made by authorized, skilled and instructed staff.
7)
The proper repair of this products requires adequately trained specialists. The repairer is
responsible for the training.
8)
Keep away aggressive cleaners from your skin, do not drink it or inhale its vapours. Always wear
safety gloves and goggles. If by mistake cleaner was swallowed, call medical aid immediately.
Strictly observe manufacturer instruction.
9)
Do not drain cleaner or transmission oil into the sewerage system or into the soil.
10)
Prior to start working on the installed or mounted transmission, the wheels must be blocked.
11)
Prior to any work on the installed transmission(e.g. oil change) or its mounted-on parts the voltage
source feeding the motor must always be disconnected resp. switched off.
12)
The local regulations for safety and prevention of accidents must be observed.
3-7
Advertisement
