Advertisement
(2)
FORKS
Loosen and remove bolts(2), washers(3)
and shims(4) which are used for fixing
the forks(5) under the platform(1).
Loosen bolts(7), and then remove pins(6)
which are used for fixing the forks(8) to
the platform(1).
(3)
MAST & PLATFORM REMOVAL
Remove bolts and retainer plates from
the left and right sides of truck frame.
Raise mast until the stub shafts on the
sides of the outer mast rail clear the
saddles of the truck frame.
Make sure the mast lifts straight up.
Take care to draw out the platform in
order that it can not happen damage
due to bump between the platform and
the inner mast.
Inspect all parts of the platform for wear
or damage.
Replace the defected parts if necessary.
7
6
2-3
1
4
5
3
2
5
10BOP7RE03
10BOP7RE08
Mast
Wire rope
10BOP7RE16
6
7
Advertisement
