Hyundai 10BOP-7 Operation Manual page 57

4) REMOVAL OF GEAR RING AND PIVOTED BOGIE BEARING
(1) Loosen the 12 hexagon screws (item 1)
on the pivoted bogie bearing (item 2),
remove and dispose them of acc. to
chapter 6.
(2) With a dead-blow soft-face hammer
slightly beat against the gear ring (item 3)
from the bottom to loosen it from the
connecting construction. Take off and
remove the pivoted bogie bearing and the
gear ring.
3-11
BRJ7DU053
BRJ7DU054