Advertisement
5)
DETERMINATION OF BEARING WIDTH DIFFERENCE OF A TAPER ROLLER BEARING
(1)
Determination of bearing width general
Zeroize depth gauge (item 1) by means
of gauge blocks (item 2).
Put the new bearing on both gauge
blocks and roll it as shown.
Determine dimension "B".
Example : Dimension "B" = 22.09 mm
(2)
D
D
etermination of bearing difference for the installation of removal shims
The difference dimension "D" of the new bearings to the bearings to be replaced is compensated
with the shim dimension.
Example :
New bearing dimension
Difference "D"
Original bearing
The height of the existing shim set must by reduced by 0.1 mm.
"B" 22.09 mm
0.10 mm
-21.99 mm
3-24
BRJ7DU091
BRJ7DU092
BRJ7DU093
Advertisement
