Advertisement
(
(
1)
Performance rolling
From MAIN PAGE using membrane keyboard numbers, it is possible to select the performance
mode which must be used in traction and pump controllers.
Performance can be chosen with button 4, and it is displayed in the top right side of the unit.
When one performance is selected, the related information will be sent via canbus to traction and
pump controllers that will manage this data. The standard functioning reduces truck performance
passing from high performance mode (H) to economy performance mode (E).
The real meaning, in terms of parameters level of these performances, depends on software
present on pump and traction controllers.
Button 4 Selects in sequence the truck performance (H
(2)
Using dashboard like console
By entering the service or engineering password, from MAIN PAGE it's possible to have access to
TRUCK MENU, which allows user to use dashboard as a real Zapi digital console connected to
one module of canbus net.
Here with roll buttons (button 1 and 2 of membrane keyboard) and enter button (button 6), it is
possible to choose which module of canbus net has to be connected to the display.
When the display has been connected, it works exactly like a Zapi digital console.
Buttons of membrane keyboard do the same functions of Zapi console keys.
Button 1 Performs function of the ROLL UP console key
Button 2 Performs function of the ROLL DOWN console key
Button 3 Performs function of the SET DOWN console key
Button 4 Performs function of the SET UP console key
Button 5 Performs function of the OUT console key
Button 6 Performs function of the ENTER console key
(3)
Using of password menu (option)
From MAIN PAGE it's always possible to have access to CHANGE PASSWORD MENU. Here with
ENTER button (button 6 of membrane keyboard) the operator can change user Graphic Smart
Display password.
To edit password use these buttons:
SET UP / SET DOWN Shifts cursor through 10 digits on the bottom side of unit
ENTER
OUT
(4)
Set maintenance hours (option)
By entering the service or engineering password from MAIN PAGE it's possible to access to
MAINTENANCE MENU. Here the service can change the programmed work hours between two
maintenances.
Buttons of membrane keyboard have the same functions in the RESET HOURMETERS MENU:
Button 1 Increases digit marked by cursor
Button 2 Decreases digit marked by cursor
Button 3 Shifts cursor on previous digit
Button 4 Shifts cursor on following digit
Button 5 Cancels all changing and out from hour meter submenu
Button 6 Saves all changing
Inputs digit selected or saves all changing
Cancels one digit or exits (if there is no digit input yet)
7-64
N
E).
Advertisement
