Advertisement
(5)
Handle the extracting fixture "S" as shown
on the right. Move the handle on the bar
upwards strongly several times until the
drive pinion is loosened from the bearing
seat completely.
Do not damage the gearing of the drive
pinion at the next work step! Damages
might cause louder running noises and
consequential damages!
(6)
By means of the extracting fixture pull the
drive pinion (item 6) out of the housing
bore and remove it.
(7)
Loosen the hexagon bolt (item 7) and
remove the extracting fixture from the
drive pinion.
Do not damage the gearing of the drive
pinion! Damages might cause louder
running noises and consequential
damages!
(8)
Pull of the grooved ball bearing (item 8) by
means of a puller or a parting tool over the
bearing seat of the drive pinion and
dispose it of according to chapter 6.
3-10
BRJ7DU049
BRJ7DU050
BRJ7DU051
BRJ7DU052
Advertisement
