Advertisement
(2)
F
F
low chart showing how to make changes to option menu:
Opening Zapi menu.
Press ROLL UP & SET UP Buttons to enter
CONFIG MENU.
The display will show: SET MODEL.
Press ROLL UP or ROLL DOWN until SET
OPTIONS appears.
SET OPTIONS menu appears.
Press ENTER to go into the SET OPTIONS
menu.
The display will show the first option.
Press ROLL UP or ROLL DOWN buttons until
desired option appears.
Desired option appears.
Press SET UP or SET DOWN buttons in order
to modify the value for selected option.
New value for selected option appears.
Press OUT to exit the menu.
Confirmation request appears.
Press ENTER to accept the changes, or press
OUT if you do not accept the changes.
SET OPTIONS menu appears.
Press OUT again. Display now shows the
opening Zapi menu.
7-58
20B7EL29
Advertisement
