Advertisement
5)
DISASSEMBLY OF TRANSMISSION HOUSING WITH TRANSMISSION COMPONENTS
(1)
Removal of sealing cap
The surface (item 1) where the sealing
cap is located must not be damaged.
The sealing cap itself is destroyed and
cannot be reused.
Insert a screwdriver (item 2) into the
sealing cap (item 3) beating cautiously
and press it off or by using the lever effect
upwards and scrap it.
The breather valve is not to be scrapped.
(2)
Removal of side cover
Loosen and remove the 10 cap screws
(item 4) on the side cover.
Do not damage the housing surface at
the next working step! Burrs and other
damages on the sealing surface which
are caused during the removal have to
be eliminated. Touch up damaged
sealing surface on the housing with an
oil stone!
Separate the side cover (item 5) from the
sealing compound with a suitable
screwdriver. Place the tool between
housing and cover and press it off slightly
from the housing.
Loosen the side cover from the housing
by tapping onto the outer contour and
dispose it of acc. to chapter 6.
(3)
Removal of wheel shaft and crown gear
Loosen and remove the 8 cap screws
(item 1) in the housing cover.
Do not damage the housing and cover
surface! Burrs and other damages on
the sealing surface which are caused
during the removal have to be
eliminated. Touch up damaged sealing
surface on the housing with an oil
stone!
3-12
BRJ7DU055
BRJ7DU056
BRJ7DU057
BRJ7DU058
Advertisement
