Advertisement
REMOVAL OF DRIVE PINION
3)
With a screwdriver press the radial
(1)
sealing ring (item 2) upwards from the
bore seat of the housing and remove it.
Dispose of the radial sealing ring
according to chapter 6.
(2)
Unsnap and remove the retaining ring
(item 3) from the housing bore by
means of flat-head pliers.
(3)
Extracting fixture 225296 is necessary to
remove the drive pinion (item 4) from the
bore.
Insert the extracting fixture into the bore of
the drive pinion.
(4)
Fasten the hexagon screw of the bearing
puller hand-tight so that a sufficient
preload of the clamping jaws is given.
By tightening the hexagon screw expand
the clamping jaws of the bearing puller
(item 5) in the bore of the drive pinion.
3-9
BRJ7DU045
BRJ7DU046
BRJ7DU047
BRJ7DU048
Advertisement
