Advertisement
2)
WARNING LAMP
When the key switch is OFF, the display makes a general test lighting and switching OFF all the
LED in sequence.
(1)
Wrench warning lamp
(2)
Thermometer warning lamp
(3)
Dead man warning lamp
(4)
Brake fail warning lamp
(5)
Parking brake signal lamp
This LED blinks when truck is in alarm condition.
16B7OM62
This LED blinks when one truck's controller is in alarm due
IMS high temperature.
IMS : Input motor switch
16B7OM63
This LED lights when the operator doesn't on the dead man
switch.
16B7OM64
This lamp lights on when the oil pressure of service brake
drops below the normal range.
When the lamp is on, stop the engine and check for its
reason.
D
D
o not operate until any problems are corrected.
10BOP7OM66
This lamp shows whether the parking brake is applied or
not.
Parking brake applied : Signal lamp lights on
Parking brake released : Signal lamp goes out
Make sure that the signal lamp goes out before operating
the machine.
10BOP7OM68
7-51
Advertisement
