Advertisement
Then remove the following parts from the
housing (item 12) : Shims and taper roller
bearing
(5)
Removal of bevel pinion shaft
Put the gear lock "S" into the housing
bearing bore of the drive pinion and block
the helical gear with it.
(S) Gear lock 62228
Unlock the hexagon nut (item 1). Loosen,
take off and remove the hexagon nut.
Take out and remove the gear lock.
Pay attention not to damage the bevel
pinion shaft when it is expelled in the
following procedure.
By means of a dead-blow soft face
hammer expel the bevel pinion shaft
(item 2) from the internal gearing and the
bearings.
3-18
BRJ7DU077
BRJ7DU078
BRJ7DU079
BRJ7DU080
Advertisement
