Hyundai 15EPM Operation Manual

Hyundai 15EPM Operation Manual

Electric pallet truck

Advertisement

Quick Links

15EPM
HYUNDAI Electric Pallet Truck
 Operation Manual
HYUNDAI CONSTRUCTION EQUIPMENT

Advertisement

Table of Contents
loading

Summary of Contents for Hyundai 15EPM

  • Page 1 15EPM HYUNDAI Electric Pallet Truck  Operation Manual HYUNDAI CONSTRUCTION EQUIPMENT...
  • Page 2: Table Of Contents

    We hope our electric pallet truck will provide great convenience for your work!  Please read the manual carefully before operation  This manual is universal manual. We reserve the right to modify technology of the electric stacker. If there is anything in the manual that is not consistent with the actual stacker, the actual stacker should be considered correct and the manual is only for reference.
  • Page 3: Safety Norms

    1. Safety regulations When operating the truck, one should always wear safe shoes. When assembling or disassembling the truck, in order to avoid injury, one should always wear safety goggles. Attention! When the truck is damaged or failure-affecting safety occurs, do not go on operating the truck.
  • Page 4 Warning! - When turning, high-speed operation should be avoided to prevent the truck from turning upside down. - The goods should not be piled too high to avoid blocking the vision line. - Braking should be conducted slightly and very carefully to prevent the goods from sliding off the tray, which may damage the goods.
  • Page 5: Truck Description

    2. Truck description Operation mode of model 15EPM truck: Running system adopts storage battery as power source and with motor as the power, through the gear to drive truck. Lifting system uses battery as power source, with motor as the power, through the hydraulic drive to promote the lifting fork of oil cylinder.
  • Page 6 Model 15EPM Drive type Electric Operation type Pedestrian Load capacity Q(kg) 1500 Load centre C(mm) Fork height, lowered (mm) Wheelbase Y(mm) 1288 Tire Tire size, front Φ195X70 Tire size, rear Φ74 Wheel number, front/rear ( x = driving 1X-2/2 wheel)...
  • Page 7: Truck Operation

    3.Truck operation Fork lifting Turn on the electric lock and emergency stop switch Figure1,press on the lifting button,fork lifts. lift lower Fig 1 Fork lowering Figure 1,press on the lowering button,fork lowers. Pallet truck driving Turn on the electric lock and emergency stop switch Figure 2 bend the handle to keeping the handle in the Section B area.
  • Page 8 Fig 3 Low-speed travelling , The truck has the function of low-speed travelling Figure 4 there is a tortoise button at the back of the handle,when the truck is energized, keep the handle in section B area,When you press the button and keep doing it, meanwhile, Rotating speed knob, the truck will be in a low speed state.
  • Page 9: Operation, Maintenance And Charging Of Battery

    Lower the fork to the lowered position. Close the electric lock and emergency stop switch. 3. Maintenance and charging of storage battery When the electricity indicator of the forklift indicates that the electricity of the battery is insufficient, charging should be conducted at once. Otherwise the battery will be damaged.
  • Page 10: Replacement Of

    situation is discovered. Level 2 maintenance: It should be conducted periodically and overall inspection should be conducted according to following requirements: a. Mechanical maintenance should be conducted every half a year. The main contents are to replace lubricating oil for the transmission gear and bearing of the drive wheel, apply lubricant to various rotating joints, while examining if the fastening items are loose, if the wheels are rotating flexibly, if the fork rises and declines normally.
  • Page 11: Common Faults And Trouble Shooting

    Fig 8 Fig 9 7. Common failures and trouble shooting The table below provides some common failures of the forklift in operation and the trouble shooting: Faults Analysis of Cause Shooting 1. Failed oil seal 1. Replace the oil seal Hydraulic oil 2....
  • Page 12: Treatment Of Abandoned Material

    8.Treatment of abandoned materials The abandoned batteries and hydraulic oil should not be placed carelessly and must be treated according to the relevant local regulations and laws. Attention must be paid to environmental protection. 9. Accessories, spare parts Model and Name Application Quantity...
  • Page 13: Electrical Principle Diagram

    10. Electrical schematic diagram ~ 11 ~...
  • Page 14: Packing List

    11. Packing list Packing List of 15EPM Electric Pallet truck Consignee: Ex-work No.: Contract No.: Ex-work Date: Net weight Dimension Name Remarks ntity (kg) (L× W× H) electric Pallet truck A complete set Technical documents, Accessory box accessories and spare parts.

Table of Contents