Advertisement
3. PRE-INSTALLATION CHECKS
Check that in the process of unpacking and subsequent handling prior to assembly, the mounting
features and parts of the brake are undamaged. Prior to fitting, remove and clean off any foreign
matter which may have found its way into the assembly during transit, also ensure that the
interfaces to which the brake is mounted are clean and free from burrs or swellings.
4. PRECAUTIONS AND RESTRICTIONS ON USE
1)
RESTRICTIONS ON USE
(1)
The equipment is designed for dry running. Friction faces must be kept completely clean of any oil,
grease or abrasive dust.
(2)
Exceeding the maximum rotation speeds stated in the specification invalidates the warranty.
(3)
The equipment can be fitted either horizontally.
(4)
This equipment is designed for an ambient temperature of 40
2)
P
P
RECAUTIONS AND SAFETY MEASURES
During maintenance, ensure that the mechanism to be braked by the equipment is at rest and
that there is no risk of accident start-up. All interventions have to be made by qualified
personnel owning this manual.
Any modification made to the brake without the express authorization of representative of
Hyundai, in the same way than any use out of the contractual specifications accepted by
Hyundai, will result in the warranty being invalidated and Hyundai will no longer be liable in
any way with regard to conformity.
F maximum (155 C insulation class).
4-2
Advertisement
