Advertisement
4)
MENU DESCRIPTION
(1)
Traction inverter
Parameter change
ACCELER. DELAY
RELEASE BRAKING
DEADMAN BRAKING
INVERS. BRAKING
DECEL. BRAKING
PEDAL BRAKING
SPEED LIMIT BRK.
CURVE BRAKING
MAX SPEED FORW
MAX SPEED BACK
AUX SPEED #1
CURVE CUTBACK
CUTBACK SPEED 1
AUX FUNCTION 1
CUTBACK SPEED 2
AUX FUNCTION 2
CUTBACK SPEED 3
Seconds. It determines the acceleration ramp. The parameter sets the time needed
to speed up the traction motor from 0Hz to 100Hz
Seconds. It controls the deceleration ramp when the travel request is released. The
parameter sets the time needed to decelerate the traction motor from 100Hz to 0Hz.
Seconds. It controls the deceleration ramp when the deadman switch is in braking
position (released). The parameter sets the time needed to decelerate the traction
motor from 100Hz to 0Hz
Seconds. It controls the deceleration ramp when the direction switch is inverted
during travel. The parameter sets the time needed to decelerate the traction motor
from 100Hz to 0Hz.
Seconds. It controls the deceleration ramp when the accelerator has turned down
but not completely released. The parameter sets the time needed to decelerate the
traction motor from 100Hz to 0Hz.
Seconds. This parameter determines the deceleration ramp when the travel request
is released and the brake pedal switch is closed. It sets the time needed to
decelerate the traction motor from 100Hz to 0Hz.
Seconds. It controls the deceleration ramp when a speed reduction has been
activated. The parameter sets the time needed to decelerate the traction motor from
100Hz to 0Hz.
Seconds. It controls the deceleration ramp when a curve speed reduction has been
activated. The parameter sets the time needed to decelerate the traction motor from
100Hz to 0Hz.
Hz. It determines the maximum speed in forward direction. When truck steer angle
is in 10 degrees and lift height is 0 to 600mm.
Hz. It determines the maximum speed in backward direction. When truck steer
angle is in 10 degrees and lift height is 0 to 600mm.
Hz. This parameter is related to the EMBRAKE management and define the speed
at which open EM Brake (default 2Hz).
Hz. It determines the maximum speed when truck steer angle is over MAX ANGLE
SP CTB and lift height is 0 to 600mm.
Hz. It determines the maximum speed when truck steer angle is in 10 degrees and
lift height is 600 to 1500mm.
Hz. It determines the maximum speed when truck steer angle is over MAX ANGLE
SP CTB and lift height is 600 to 1500mm.
Hz. It determines the maximum speed when truck steer angle is in 10 degrees and
lift height is 1500 to 3000mm.
Hz. It determines the maximum speed when truck steer angle is over MAX ANGLE
SP CTB and lift height is 1500 to 3000mm.
Hz. It determines the maximum speed when truck steer angle is in 10 degrees and
lift height is 3000 to 5500mm.
Description
7-31
Advertisement
