Hyundai 10BOP-7 Operation Manual page 88

10) INSTALLATION OF BEARING FOR WHEEL SHAFT
(1) Determination of required shim thickness for exact bearing preload of the wheel shaft
Thickness of the shim (item 4) to be added can be determined with the following method:
1 Measuring ledge
2 Housing cover
Dim. "L" Distance from mounting face/housing cover equal to zero position on measuring instrument
Dim. "C" Measure distance from contact shim/housing cover.
Dim. "L" e.g. Zero position on measuring instrument = 0
Dim. "C" e.g. 0.85 mm
1 Measuring ledge
2 Bevel pinion shaft
3 Wheel shaft
4 Crown gear
5 Housing
Dim. "A"
Distance from mounting face /
housing equal to zero position
on measuring instrument
Dim. "F"
Measure distance
contact bearing inner ring /
wheel shaft.
Dim. "A"
e.g. zero position on measuring
instrument = 0
Dim. "F"
e.g. 23.01 mm
from
3-42
BRJ7DU142
BRJ7DU143