Advertisement
(7)
Installation of side cover
Prior to the installation of the side cover clean the sealing surface on the housing and remove the
oil residues. The sealing surface must not be damaged.
Wear safety gloves for working with adhesives and observe the LOCTITE instructions.
The following step must be carried out within 10 minutes since the LOCTITE hardens.
For sealing of the through holes as well
as of the area around the screw the
following sealing application is required:
LOCTITE 243 : Product application into
the threaded blind holes M6 as sealing
function by excess product.
Sealing of the cover:
LOCTITE 5910: Product application as
uniform adhesive application onto the
sealing surface at the housing as sealing
function.
Put on the side cover (sheet cover) and
fasten it hand-tight with 10 cap screws
M6
10 (item 2) onto the housing.
3-46
BRJ7DU153
BRJ7DU154
BRJ7DU155
Advertisement
