Advertisement
6)
DESCRIPTION OF CONSOLE USING
(
(
1)
Access to SET MODEL menu.
The only parameter present in SET MODEL function is CONNECTED TO.
By setting this parameter, operator can connect ZAPI console to every ZAPI product connected to
CAN-BUS line. This functionality allows completely control of every ZAPI product without changing
the position of the console connector.
Opening Zapi menu.
Press ROLL UP & SET UP buttons to enter
CONFIG MENU.
The display will show: SET MODEL. If another
menu is displayed, press ROLL UP or ROLL
DOWN until SET MODEL appears.
Press ENTER to go into the SET MODEL.
The display will shows the first option, only
CONNECTED TO option is present in this menu.
Press SET UP or SET DOWN buttons in order
to select the desired value for selected option.
New desired value appears.
Press OUT to exit the menu.
The display will ask "ARE YOU SURE?"
Press ENTER for YES, or OUT if you do not
accept the changes.
SET MODEL menu appears.
Press OUT again. Console now disconnects
and reconnects.
Display now shows the opening Zapi Menu of
the ZAPI product corresponding to option
selected at point 7.
7-57
20B7EL28
Advertisement
