Chapter 5 System Configuration; Applicable Systems - Mitsubishi Electric NZ2GN2S1-32D User Manual

5
SYSTEM CONFIGURATION
This chapter describes system configuration using an I/O module.
For CC-Link IE Field Network configuration, refer to the following.
 User's manual for the master/local module used
5.1

Applicable Systems

Applicable master station
When using an I/O module, use the following products as a master station.
Model
RJ71GF11-T2
RJ71EN71
RnENCPU
RD77GF32, RD77GF16, RD77GF8, RD77GF4
QJ71GF11-T2
LJ71GF11-T2
QD77GF8, QD77GF4
QD77GF16
The above information of "applicable master station" is information at the time of this manual's issuance.
For the latest information, refer to the CC-Link Partner Association's homepage.
www.cc-link.org
Compatible software version
For the compatible software version, always keep the engineering tool of the master station up to date.
The compatible engineering tool is GX Works3 or GX Works2.
When the latest software is necessary, please consult your local Mitsubishi representative.
Compatible software package
Diagnosing the I/O module requires GX Works3 or GX Works2.
Install GX Works3 or GX Works2 with the following version in accordance with the I/O module used.
Model
NZ2GN2S1-32D, NZ2GN2B1-32D, NZ2GN2S1-32T, NZ2GN2B1-32T, NZ2GN2S1-32TE,
NZ2GN2B1-32TE, NZ2GN2S1-32DT, NZ2GN2B1-32DT, NZ2GN2S1-32DTE, NZ2GN2B1-32DTE
NZ2GNCF1-32D, NZ2GNCE3-32D, NZ2GNCF1-32T, NZ2GNCE3-32DT
First five digits of serial number
No restriction
The first five digits of the serial number are "14102" or later.
The first five digits of the serial number are "17101" or later.
The first five digits of the serial number are "17102" or later.
Software version
GX Works3
1.060N or later
1.065T or later
5 SYSTEM CONFIGURATION
GX Works2
1.590Q or later
1.595V or later
67
5.1 Applicable Systems
5