Target Role Configuration - Quantum DXi4500 User Manual

Chapter 8: DXi4500 Data Services

Target Role Configuration

Target Role Configuration
148
• Click Disable to disable replication for all deduplicated NAS shares.
Note: If you click Disable during a replication in process, the
system will complete the entire replication and then disable
replication on the system. The system will be unable to
replicate until you click Enable.
Note: To disable replication for a single share, select the share on
the Source Role NAS page and click Edit. Clear the Enable
Replication and the Enable scheduled replication check
boxes, then click Apply. For more information, see
Role NAS Configuration
Source role performance data includes statistics gathered while
replicating or failing back shares to target systems.
• To clear these statistics, click Clear.
Use the Target Role page to define up to 10 source systems that the
target can accept replicated data from. The Target Role page is also
used to perform actions upon replicated NAS shares that have been
received. The source systems must be defined in the Target Role page
prior to defining the target systems in the Source Role page.
To configure the target system for replication:
1 From the Replication page, click the Target Role tab.
The Target Role General page displays (see
on page 142.
Figure 58).
Quantum DXi4500 User's Guide
Source