Unified Messaging-Incomplete Call Handling Service; Unified Messaging-Intercept Routing To A Mailbox; Unified Messaging-Intercom Paging - Panasonic KX-NS700 Feature Manual

20.1.40 Unified Messaging—Incomplete Call Handling Service
Description
Allows the subscriber to offer callers several service options when the extension is busy or there is no
answer. Options available for Incomplete Call Handling for Busy or No Answer are:
•
Leaving a Message
•
Transfer to Covering Extension
•
Returning to the Automated Attendant Top Menu
•
Intercom Paging
•
Custom Service
•
Calling Operators
PC Programming Manual References
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
→Incomplete Call Handling for No Answer
→Incomplete Call Handling for Busy
Feature Manual References
20.1.42 Unified Messaging—Intercom Paging
Operating Manual References
Subscriber Operation
1.6.5 Transferring Calls—Incomplete Call Handling
20.1.41 Unified Messaging—Intercept Routing to a Mailbox
Description
If the Intercept Routing destination is set to the floating extension number of the UM group, and the
"Intercept to Mailbox for Call to Extension" setting is enabled through system programming, intercepted
CO line calls will be redirected to the extension's mailbox. Therefore the caller can leave a message in the
mailbox of the extension without knowing the mailbox number.
PC Programming Manual References
11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings—Intercept to Mailbox for Call to
Extension
Feature Manual References
10.1.12 Intercept Routing
20.1.42 Unified Messaging—Intercom Paging
Description
Allows callers to page subscribers when the subscribers have set Intercom Paging for Call Transfer or when
the subscribers have set Intercom Paging for Incomplete Call Handling. The caller is briefly placed on hold
while the system announces the page and until the subscriber answers the page. The subscriber can
answer the page from any extension using the paging answer feature number. If Caller ID information is
Document Version 2017-06
20.1.40 Unified Messaging—Incomplete Call Handling Service
Feature Manual 395