Panasonic KX-NS700 Feature Manual page 378

20.1.1 UNIFIED MESSAGING FEATURES
•
It is programmable whether the calls queue when all ports in the group are busy through system
programming. If queuing is disabled through system programming, the call will be redirected to the
intercept destination of the first member extension of the UM group.
•
DSP Resource Usage
Connecting to the Unified Messaging system (including using features such as Two-way Recording)
requires a certain number of DSP resources. If all DSP resources are in use, this operation cannot be
performed. To ensure a minimum level of performance, DSP resources can be reserved for Unified
Messaging operations. (→ 5.1.18 DSP Resource Usage)
Notice
Reserving resources for Two-way Recording (→ 20.1.7 Unified Messaging—Automatic Two-way
Recording for Manager, → 20.1.83 Unified Messaging—Two-way Record/Two-way Transfer) reserves
the necessary number of UM ports exclusively for Two-way Recording. For example, if 2 UM ports
(the default) are available and you reserve resources for 2 Two-way Recording sessions, both UM
ports will be reserved for Two-way Recording, and the Unified Messaging system will not be available
for other uses.
Two-way Recording
UM
Port 1
Reserved (Two-way)
To provide access to the Unified Messaging system in this case, either the number of UM ports must
be increased or the number of resources reserved for Two-way Recording must be lowered.
•
Installing KX-NSU102 or KX-NSU104 (Unified Messaging Activation Key) increases the number of
available UM ports at a PBX (maximum: 24).
•
When a trunk call is made from the UM port (or VM port), TRS/Barring Level 7 is applied (→ 19.1.5 TRS
(Toll Restriction)). However, when a trunk call is made from the UM port (or VM port) using a feature
number for System Speed Dial, this call will not be restricted.
Installation Manual References
4.3.2 SD Memory Cards
5.9 Configuration of Users
PC Programming Manual References
9.6 PBX Configuration—[1-1] Configuration—Slot—UM Port Property
10.5 PBX Configuration—[2-5] System—Holiday Table
10.9 PBX Configuration—[2-9] System—System Options—Option 9
11.7 PBX Configuration—[3-7] Group—UM Group
23.4 UM Configuration—[4-4] Service Settings—Holiday Table
Operating Manual References
1.6 Unified Messaging Features
378 Feature Manual
Incoming Call
UM
Port 2
Reserved (Two-way)
UM Group
Document Version 2017-06