Hot Line - Panasonic KX-NS700 Feature Manual

9.1.6 Hot Line

Note
In this example, "0" should be assigned as a Host PBX Access code for trunk group (TRG) 1 of this
PBX.
Conditions
•
TRS
TRS checks only the dialed telephone number excluding the Host PBX Access code when accessing the
telephone company through the host PBX. (→ 19.1.5 TRS (Toll Restriction))
•
ARS
A pause is not automatically inserted between the user-dialed access code and the subsequent digits
when ARS mode is enabled. (→ 2.1.3 ARS (Automatic Route Selection))
•
SMDR
The dialed number including the Host PBX Access code will be recorded on Station Message Detailed
Recording (SMDR) only if the modified number setting is selected in the ARS setting for SMDR.
•
When a Host PBX Access code is assigned to a trunk group, calls to extensions of the host PBX are not
recorded on SMDR.
•
A Host PBX Access Code can be used to record only long distance calls on SMDR when a CO line port is
connected directly to the telephone company (not a host PBX). This is allowed when the long distance
code (e.g., "0") is assigned as the Host PBX Access code. All local calls (e.g., calls that do not require a
"0" to be dialed first) are treated as extensions of the telephone company and do not get recorded on
SMDR, because in this case this PBX recognizes the telephone company as the host PBX. Therefore,
only long distance calls are recorded on SMDR.
PC Programming Manual References
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Host PBX Access Code
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR Options—Option—ARS Dial
PT Programming Manual References
[471] Host PBX Access Code
Feature Manual References
18.1.7 SMDR (Station Message Detail Recording)
23.1 Capacity of System Resources
9.1.6 Hot Line
Description
An extension user can make an outgoing call by simply going off-hook, if the user has previously stored the
telephone number or the extension number.
If the Hot Line feature is set and the user goes off-hook, a dial tone is generated for a specified time
assigned through system programming and then dialing starts. During this waiting time the user can dial
another party, overriding the Hot Line feature.
This feature is also known as Pickup Dialing.
Conditions
•
Compatible Telephone
Proprietary telephone (PT), single line telephone (SLT), and portable station (PS)
166 Feature Manual Document Version 2017-06